Skip to main content

mac-address
MAC (Media Access Control) addresses are permanent by design, several mechanisms allow modification, or “spoofing”, of the MAC address that is reported by the operating system. This can be useful for privacy reasons, for instance when connecting to a Wi-Fi hotspot, or to ensure interoperability. Some internet service providers bind their service to a specific MAC address; if the user then changes their network card or intends to install a router, the service won’t work anymore. Changing the MAC address of the new interface will solve the problem. Similarly, some software licenses are bound to a specific MAC address. Changing the MAC address in this way is not permanent: after a reboot, it will revert to the MAC address physically stored in the card. A MAC address is 48 bits in length.
A MAC address is a physical hardware address assigned to each device that has the capability of connecting to a network. The internet is nothing more than a large network. The MAC address is something that is assigned in the chip on the device and is not something the user can change.
As a MAC address can be changed, it can be unwise to rely on this as a single method of authentication. IEEE 802.1x is an emerging standard better suited to authenticating devices at a low level.
Types of MAC address:
Unicast address : An address for a specific computer.
Multicast address : An address for a specific group of computers in network.
Broadcast address : An address for all computers in network.
How Can U Change MAC Address:
Windows
Under Windows XP, the MAC address can be changed in the Ethernet adapter’s Properties menu, in the Advanced tab, as “MAC Address”, “Locally Administered Address”, “Ethernet Address” or “Network Address”. The exact name depends on the Ethernet driver used; not all drivers support changing the MAC address in this way.
However, a better solution – requiring Administrative User Rights – is to pass over the System Registry Keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}. Here settings for each network interface can be found. The contents of the string value called ‘NetworkAddress’ will be used to set the MAC address of the adapter when next it is enabled. Resetting the adapter can be accomplished in script with the freely available command line utility devcon from Microsoft, or from the adapters context menu in the Network Connections control panel applet.
There is a nice tool to change the MAC address for all cards (even those that can’t be changed through the adapter’s Properties menu): SMAC MAC Address Changer.
Note: to check your MAC address easily on a Windows XP box, go to Run, type CMD, then type “ipconfig /all” without quotation in the command prompt. The number under physical address is the MAC address. If multiple IP are displayed, you should look under the label “Ethernet adapter x”, where x is the name of your connection (which is Local Area Connection by default).
Router
The method to change the MAC address of a router varies with the router. Not all routers have the ability to change their MAC address. The feature is often referred to as “clone MAC address”. This take the MAC address of one of the machine on your network and replaces the router’s existing MAC address with it. Some support the option to manually enter the MAC address.
How to change a MAC address in Linux
To change your MAC address in Linux (and most *nix system) is easy. All it takes is two easy to script commands:
ifconfig eth0 down hw ether 00:00:00:00:00:01
ifconfig eth0 up
These two little commands would set your eth0 interface to use the MAC 00:00:00:00:00:01. Just plug in the NIC you want to set and the MAC address you want to use into the commands above and your done. Changing your MAC address is one of those things that is much easier to do in Linux then under Windows.

Comments

Post a Comment

Popular posts from this blog

The Windows Firewall with Advanced Security is a firewall that runs on the Windows Server 2012 and is turned on by default. The Firewall settings within Windows Server 2012 are managed from within the  Windows Firewall Microsoft Management Console . To set Firewall settings perform the following steps − Step 1  − Click on the Server Manager from the task bar → Click the Tools menu and select Windows Firewall with Advanced Security. Step 2  − To see the current configuration settings by selecting  Windows Firewall Properties  from the MMC. This  allows access to modify the settings  for each of the three firewall profiles, which are –  Domain, Private and Public  and IPsec settings. Step 3  − Applying custom rules, which will include the following two steps − Select either  Inbound Rules  or  Outbound Rules  under  Windows Firewall with Advanced Security  on the left side of the management console...
Post a Comment
Read more
In this chapter, we will see how to enable remote desktop application. It is important because this enables us to work remotely on the server. To do this, we have the following two options. For the first option, we have to follow the steps given below. Step 1  − Go to Start → right click “This PC” → Properties. Step 2  − On Left side click “Remote Setting”. Step 3  − Check radio button “Allow Remote connection to this computer” and Check box “Allow connection only from computers running Remote Desktop with Network Level Authentication (recommended)” → click “Select Users”. Step 4  − Click Add. Step 5  − Type user that you want to allow access. In my case, it is administrator → click OK. For the  second option , we need to follow the steps given below. Step 1  − Click on “Server Manage” → Local Server → click on “Enable” or Disable, if it is Disabled.
Post a Comment
Read more
In this chapter, we will see how to configure WSUS and tune it. The following steps should be followed for configuring it. Step 1  − When you open it for the first time, you should do it by going to “Server Manager” → Tools → Windows Server Update Services, then a Configuration wizard will be opened and then click → Next. Step 2  − Click “Start Connecting” → Wait until the green bar is full and then → Next. Step 3  − Check the box for which the updates want to be taken, I did for English and then → Next. Step 4  − Check the box for all the products which you want to update. It is just for Microsoft products and it is recommended to include all the products related to Microsoft and then → Next. Step 5  − Choose the classification updated to be downloaded, if you have a very good internet speed, then check all the boxes, otherwise just check “Critical Updates”. Step 6  − Now we should schedule the updates which I will recommend to do it a...
Post a Comment
Read more